Low pH powder RO cleaning chemical for dissolution of silicate scales. Does not contain ammonium bifluoride. Effective for removal of metal hydroxide scales.
Download Brochure Advantages
- Low pH membrane-cleaning compound for dissolution of light silica deposits
- Reverses lost salt rejection caused by swelling due to high pH cleaning
- Effectively dissolves and chelates iron, aluminum and other metal oxides and hydroxides
- Compatible with all Thin Film Composite R.O. membranes from all major membrane suppliers
- Certified by NSF to NSF/ANSI Standard 60 for use in potable systems
- Halal certified
- Kosher certified
Typical Properties
- Appearance: White granular powder
- Odor: Characteristic
- Solubility in water: Complete
Packaging
- 50 lb. pails
- 400 lb. non-returnable plastic drums
Safety and Handling
Avoid breathing dust. Do not get in eyes, on skin or clothing. Keep container closed. Wash thoroughly after handling. For more information, see the Safety Data Sheet provided with this product.
Chemical Feeding and Control
The cleaning solution should be prepared using RO permeate or softened water that is free of residual chlorine or other oxidizing agents. The solution is prepared by adding 17 lbs of AWC C-209 for every 100 gallons of water (2 % by wt. Solution). The cleaning solution is then circulated throughout the system without exceeding pressures, temperatures and flow rates recommended by the membrane manufacturer. Cleaning efficacy can be further improved by heating the cleaning solution and alternately circulating the solution for 60 minutes and then soaking the membranes for 30- 60 minutes for a total cleaning time of 4-6 hours. AWC C-209 should be added as necessary to the cleaning solution to maintain the pH range throughout the entire cleaning process. Depending on severity of fouling, your AWC representative will recommend optimal cleaning times.
